230 V cable
From
€16.48*
230 V power supply cable for side channel blower
Description:
230 V power supply cable with 3 m or 5 m length
Motor protection switch 2,5 - 4 A (400V)
From
€28.32*
suitable for: Side channel blowers and rotary vane vacuum pumps
Function: According to standard DIN EN 60204-1, motors with a rating of more than 0.5 kW must be protected against unacceptable heating. This applies to the majority of our side channel blowers. A motor protection switch ensures both overload protection and short circuit protection for the cables and lines. If an unacceptable current increase, e.g. by overloading or blocking the motor, the motor protection switch interrupts all active conductors. An overload protector as well as phase loss protection can not be provided by a motor protection switch. For this purpose, further actions must be taken.
technical data:
Voltage:
400 V (3~)
Rated current:
2,5 - 4,0 A
Options:
- Motor protection switch- Motor protection switch with housing (IP 55)- Motor protection switch with housing and 3 m power supply cable (installed)
Motor protection switch 4 - 6,3 A (230V)
From
€28.32*
suitable for: Side channel blowers and rotary vane vacuum pumps
Function: According to standard DIN EN 60204-1, motors with a rating of more than 0.5 kW must be protected against unacceptable heating. This applies to the majority of our side channel blowers. A motor protection switch ensures both overload protection and short circuit protection for the cables and lines. If an unacceptable current increase, e.g. by overloading or blocking the motor, the motor protection switch interrupts all active conductors. An overload protector as well as phase loss protection can not be provided by a motor protection switch. For this purpose, further actions must be taken.
technical data:
Voltage:
230 V (1~)
Rated current:
4,0 - 6,3 A
Options:
- Motor protection switch- Motor protection switch with housing (IP 55)- Motor protection switch with housing and 3 m power supply cable (installed)
Motor protection switch 2,5 - 4 A (230V)
From
€30.38*
suitable for: Side channel blowers and rotary vane vacuum pumps
Function: According to standard DIN EN 60204-1, motors with a rating of more than 0.5 kW must be protected against unacceptable heating. This applies to the majority of our side channel blowers. A motor protection switch ensures both overload protection and short circuit protection for the cables and lines. If an unacceptable current increase, e.g. by overloading or blocking the motor, the motor protection switch interrupts all active conductors. An overload protector as well as phase loss protection can not be provided by a motor protection switch. For this purpose, further actions must be taken.
technical data:
Voltage:
230 V (1~)
Rated current:
2,5 - 4,0 A
Options:
- Motor protection switch- Motor protection switch with housing (IP 55)- Motor protection switch with housing and 3 m power supply cable (installed)
Motor protection switch 1 - 1,6 A (230V)
From
€28.32*
suitable for: Side channel blowers and rotary vane vacuum pumps
Function: According to standard DIN EN 60204-1, motors with a rating of more than 0.5 kW must be protected against unacceptable heating. This applies to the majority of our side channel blowers. A motor protection switch ensures both overload protection and short circuit protection for the cables and lines. If an unacceptable current increase, e.g. by overloading or blocking the motor, the motor protection switch interrupts all active conductors. An overload protector as well as phase loss protection can not be provided by a motor protection switch. For this purpose, further actions must be taken.
technical data:
Voltage:
230 V (1~)
Rated current:
1,0 - 1,6 A
Options:
- Motor protection switch- Motor protection switch with housing (IP 55)- Motor protection switch with housing and 3 m power supply cable (installed)
Motor protection switch 1 - 1,6 A (400V)
From
€28.32*
suitable for: Side channel blowers and rotary vane vacuum pumps
Function: According to standard DIN EN 60204-1, motors with a rating of more than 0.5 kW must be protected against unacceptable heating. This applies to the majority of our side channel blowers. A motor protection switch ensures both overload protection and short circuit protection for the cables and lines. If an unacceptable current increase, e.g. by overloading or blocking the motor, the motor protection switch interrupts all active conductors. An overload protector as well as phase loss protection can not be provided by a motor protection switch. For this purpose, further actions must be taken.
technical data:
Voltage:
400 V (3~)
Rated current:
1,0 - 1,6 A
Options:
- Motor protection switch- Motor protection switch with housing (IP 55)- Motor protection switch with housing and 3 m power supply cable (installed)
Motor protection switch 1,6 - 2,5 A (230V)
€28.32*
Options:
motor protection switch
suitable for: Side channel blowers and rotary vane vacuum pumps
Function: According to standard DIN EN 60204-1, motors with a rating of more than 0.5 kW must be protected against unacceptable heating. This applies to the majority of our side channel blowers. A motor protection switch ensures both overload protection and short circuit protection for the cables and lines. If an unacceptable current increase, e.g. by overloading or blocking the motor, the motor protection switch interrupts all active conductors. An overload protector as well as phase loss protection can not be provided by a motor protection switch. For this purpose, further actions must be taken.
technical data:
Voltage:
230 V (1~)
Rated current:
1,6 - 2,5 A
Options:
- Motor protection switch- Motor protection switch with housing (IP 55)- Motor protection switch with housing and 3 m power supply cable (installed)
400 V power supply cable
From
€30.90*
400 V power supply cable for side channel blower
Description:
400 V power supply cable with 3 m or 5 m length
Note:
According to standard EN 60204-1 an electric motor with a rated power of more than 0.5 kW has to be protected against overheating. The use of a motor protection switch protects the motor against overload as well as a short circuit.A direct connection without motor protection switch is only possible in accordance with this standard.
Motor protection switch 1,6 - 2,5 A (400V)
From
€28.32*
suitable for: Side channel blowers and rotary vane vacuum pumps
Function: According to standard DIN EN 60204-1, motors with a rating of more than 0.5 kW must be protected against unacceptable heating. This applies to the majority of our side channel blowers. A motor protection switch ensures both overload protection and short circuit protection for the cables and lines. If an unacceptable current increase, e.g. by overloading or blocking the motor, the motor protection switch interrupts all active conductors. An overload protector as well as phase loss protection can not be provided by a motor protection switch. For this purpose, further actions must be taken.
technical data:
Voltage:
400 V (3~)
Rated current:
1,6 - 2,5 A
Options:
- Motor protection switch- Motor protection switch with housing (IP 55)- Motor protection switch with housing and 3 m power supply cable (installed)
Motor protection switch 6,3 - 10 A (400V)
From
€28.32*
suitable for: Side channel blowers and rotary vane vacuum pumps
Function: According to standard DIN EN 60204-1, motors with a rating of more than 0.5 kW must be protected against unacceptable heating. This applies to the majority of our side channel blowers. A motor protection switch ensures both overload protection and short circuit protection for the cables and lines. If an unacceptable current increase, e.g. by overloading or blocking the motor, the motor protection switch interrupts all active conductors. An overload protector as well as phase loss protection can not be provided by a motor protection switch. For this purpose, further actions must be taken.
technical data:
Voltage:
400 V (3~)
Rated current:
6,3 - 10,0 A
Options:
- Motor protection switch- Motor protection switch with housing (IP 55)- Motor protection switch with housing and 3 m power supply cable (installed)
Motor protection switch 4 - 6,3 A (400V)
From
€28.32*
suitable for: Side channel blowers and rotary vane vacuum pumps
Function: According to standard DIN EN 60204-1, motors with a rating of more than 0.5 kW must be protected against unacceptable heating. This applies to the majority of our side channel blowers. A motor protection switch ensures both overload protection and short circuit protection for the cables and lines. If an unacceptable current increase, e.g. by overloading or blocking the motor, the motor protection switch interrupts all active conductors. An overload protector as well as phase loss protection can not be provided by a motor protection switch. For this purpose, further actions must be taken.
technical data:
Voltage:
400 V (3~)
Rated current:
4,0 - 6,3 A
Options:
- Motor protection switch- Motor protection switch with housing (IP 55)- Motor protection switch with housing and 3 m power supply cable (installed)
Motor protection switch 6,3 - 10 A (230V)
From
€30.38*
suitable for: Side channel blowers and rotary vane vacuum pumps
Function: According to standard DIN EN 60204-1, motors with a rating of more than 0.5 kW must be protected against unacceptable heating. This applies to the majority of our side channel blowers. A motor protection switch ensures both overload protection and short circuit protection for the cables and lines. If an unacceptable current increase, e.g. by overloading or blocking the motor, the motor protection switch interrupts all active conductors. An overload protector as well as phase loss protection can not be provided by a motor protection switch. For this purpose, further actions must be taken.
technical data:
Voltage:
230 V (1~)
Rated current:
6,3 - 10,0 A
Options:
- Motor protection switch- Motor protection switch with housing (IP 55)- Motor protection switch with housing and 3 m power supply cable (installed)